How to tell if your vehicle needs a Power Window Motor replacement?

1. The power window cannot be raised or lowered at all
When you press the power window switch, the window does not rise or fall at all, or it only moves a short distance and then stops working. This is usually a sign of a damaged power window motor. Especially when this happens and the window cannot be restored to normal working condition, replacing the power window motor is the most direct solution.

The Naxing Power Window Motor is designed to perfectly match the original vehicle window lift motor, providing stable power support to help the power window run smoothly. If there is a problem with the power window motor, the lifting function of the power window will be seriously affected. At this time, you need to check whether the motor is faulty and replace it in time to restore normal function.

2. The power window is slow to rise or fall or unresponsive
If your power window rises and falls slowly, or the window rises and falls slowly after pressing the switch, this may be a sign that the power window motor is gradually failing. Wear or failure of the internal components of the power window motor, especially fatigue of the components after long-term and frequent use, will lead to insufficient motor power output, resulting in slow window rise and fall.

Naxing Power Window Motor has been carefully designed and optimized by finite element analysis, with high durability and stability, and can maintain good performance under high load and long-term use.

3. The electric window motor makes unusual noises
Under normal circumstances, the electric window motor should be smooth and low-noise when working. If the electric window motor makes a harsh friction sound, humming or other unusual sounds, it usually indicates that the gears, bearings or other parts inside the motor are worn or damaged.

Naxing Power Window Motor adopts high-precision manufacturing technology, and the design fully considers noise control and vibration suppression, so the noise is low and smooth during normal operation. If your electric window motor starts to make unusual noises, this is often a sign of problems inside the motor. It is recommended to check and replace it in time.

4. The window rises and falls unevenly
When the electric window motor is unstable, you may find that the window rises and falls unevenly, one side rises and falls significantly slower, or there is a jamming phenomenon during the rise and fall process. The cause of this may be a failure in the circuit or transmission system inside the motor, which cannot provide uniform power output.

Naxing Power Window Motor uses advanced finite element analysis technology in design to ensure the stability and uniform power output of the motor. If uneven lifting occurs, it may be due to a fault or wear inside the motor. The electric window motor needs to be replaced in time to ensure the normal use of the vehicle window.

5. Overheating of the electric window motor during operation
If you find that the surface temperature of the motor rises abnormally when using the electric window, or there is a jamming and stopping phenomenon during the lifting and lowering of the electric window, the overheating of the electric window motor may be caused by an internal fault or abnormal current of the motor. When the electric window motor is in operation for a long time, the temperature inside the motor may be too high due to poor heat dissipation or excessive current.

Naxing Power Window Motor pays special attention to thermal management in its design, and ensures that the motor can maintain a stable operating temperature under high load through fine heat dissipation design and structural optimization. If you find that the electric window motor is overheating and affects the normal use of the window lifting and lowering, you should consider replacing the electric window motor to avoid damage to the motor due to overheating.

6. Water leakage or corrosion of the electric window motor
The electric window motor may be exposed to the humid environment around the car window for a long time, and corrosion or water vapor may penetrate into the motor, causing damage to the motor. Especially in rainy or humid environments, the external waterproof design of the motor is particularly important. If the electric window motor has obvious rust, corrosion or water seeping into the motor, it means that the motor has been corroded by environmental factors, which may affect its normal operation.

Naxing Power Window Motor uses high-quality materials and strict protection design, which can effectively prevent water vapor intrusion and external corrosion, but it still needs to be checked regularly when used in harsh environments. If corrosion or water leakage is found on the outside of the motor, replacing the electric window motor in time is an effective way to ensure vehicle safety and electric window function.